A Beginner's Guide To Electronics

Four Tips For Choosing A Network Patch Lead

Network patch leads are a great way to connect two devices together. They come in a range of sizes and shapes, but what do you need to know when choosing one? Here are four tips to help you choose the right network patch lead for the job:

1. Pick The Right Length For Your Network Patch Lead

The first thing to consider when choosing a network patch lead is its length. It's important to ensure that the patch lead is long enough to reach from one device to another. For example, if you're connecting two servers together, make sure your patch lead is long enough so that it doesn't have to be bent into an unnatural shape. This could cause damage or even break the cable over time.

2. Consider The Number Of Sockets When Choosing A Network Patch Lead

Another important factor when choosing a network patch lead is how many sockets it has on either end. If you're connecting two computers together and need a patch lead that has both RJ45 sockets and another type of socket, such as a USB port or HDMI, then make sure the network patch lead you choose has the appropriate sockets on either end. For example, if you want to connect your computer to an external hard drive without a USB hub, then your patch lead should have an RJ45 socket at one end and an HDMI socket at the other.

3. Look At The Connectors Used With Your Network Patch Lead

Patch leads come with different connectors on each end. For example, a CAT6a ethernet cable might have RJ45 connectors on each end, while a CAT5e cable may have RJ45 connectors or Ethernet ports. It's important to check which type of connector your network patch lead has before you buy it. This way, you can make sure it will work with the hardware you need to connect together. If you're not sure which type is best for your application, ask an electronics specialist. 

4. Choose Between Shielded or Unshielded Cables When Picking A Network Patch Lead

Some cables have shielding around them to protect against interference from other equipment in the area — especially wireless devices like smartphones and laptops, which may interfere with signals from other cables in close proximity (e.g., Ethernet). These shielded cables are often used when there is a lot of interference or when there is likely to be interference that could degrade signal quality.

When it comes to choosing a patch lead, there are a few things to consider. The above are four tips for choosing the right network patch lead for your application. To find the right patch lead for your needs, contact a local company, like CAbleHUB.